| 钢丝编织高压胶管总成编号规则 |
| 添加时间：2019/11/18 10:58:57 浏览次数： |
| 高压钢丝编织胶管总成： High pressure steel wire braided rubber tube assembly: 承压部分一般由两层到三层钢丝编织层组成,绝缘阻隔曾有内胶层、中胶层和外胶层组成。钢丝编织成处在中胶层之中层层交叉。内胶层承担基本内压和液体腐蚀性的阻隔作用。外胶层保护整个胶管能够不被全天候的环境所侵蚀。 The pressure bearing part is generally composed of two to three layers of steel wire braid, and the insulation barrier used to be composed of inner rubber layer, middle rubber layer and outer rubber layer. The steel wire is woven into a layer of interlaced rubber. The inner rubber layer acts as a barrier for basic internal pressure and liquid corrosiveness. The outer rubber layer protects the whole rubber tube from being eroded by the all-weather environment. 钢丝编织高压胶管总成编号规则如下： The numbering rules of steel wire braided high-pressure rubber tube assembly are as follows: KJ RB 甲 — 乙 KJ RB a-b 编号KJ部分代表，该物品为高压胶管总成。 The part No. kJ represents the high-pressure rubber tube assembly. 编号RB部分代表，该总成属于钢丝编织胶管总成一类。 Part RB represents that the assembly belongs to the steel wire braided rubber tube assembly. 编号 甲 部分明确了钢丝编织层的层数。 Part a of No. a specifies the number of layers of steel wire braid. 编号 乙 部分明确了该胶管的公称内径 Part B of the number specifies the nominal inner diameter of the hose 举例如下：KJRB3—6.3 表示含义为：3层钢丝编织高压胶管总成，公称内径6.3毫米。 For example, kjrb3-6.3 means: 3-layer steel wire braided high-pressure rubber tube assembly, with a nominal inner diameter of 6.3mm. |
| 上一页 高压胶管制作流程 |
| 下一页 钻井专用胶管 |
Copyright © 技术支持：遨游网络