电动伸缩门调试技巧
Debugging skills of electric telescopic door
1、用手动的方式人工推拉门体，检查门体运行是否正常，在确定门体运行正常的情况下，方可接通电源。
1. Manually push and pull the door body to check whether the door body operates normally. The power supply can be connected only after it is determined that the door body operates normally.
2、接通电源钢纤维 驱鸟设备 保定通风管道 塑料土工格栅 检查井模具 流水槽模具 锻造厂家 华尔街铜牛，控制盒电源指示灯亮，按“开”按钮，“开”指示灯亮，门体能自动打开至设定的限位处自动停止。按“关”按钮 ，“关”指示灯亮，门体能自动关闭至设定的限位处自动停止。
2. When the power is turned on, the power indicator of the control box will be on. Press the "on" button, the "on" indicator will be on, and the door will automatically open and stop at the set limit. Press the "off" button, the "off" indicator light will be on, and the door will automatically close to the set limit and stop automatically.
3、在调试运行过程如发现门体运行限位不准确，可调整限位开关的高度。
3. In case of inaccurate door operation limit during commissioning, the height of limit switch can be adjusted.
4、调试运行5次以上，如一切正常方可投入使用。
4. After more than 5 times of commissioning and operation, it can be put into use only if everything is norma